3
Section 1: Main Components
Stretch Unit
System coolant inlet and outlet valves
:
Be sure to supply cool water when in operation.
Failure to do so may lead to overheating inside the
incubator or motor burnout.
Chamber length adjusting knob
:
Use the knob to adjust the distance of chamber
brackets to maintain tension on the chamber. The
bottom of the chamber should be taut.
Connectors:
Use Connector Cable to connect Control
Unit to Stretch Unit
Alignment Pins:
Holds Strain Chamber Brackets in place
Strain Chamber Brackets:
Each chamber is mounted on four pins,
two pins on each bracket.
Mounting Stage:
Brackets sit on top of the stage
