background image

First Time Use - Skin Test and 

Choosing Your Light Intensity 

Level 

The light intensity level setting determines the intensity 
of the IPL flash delivered to your skin. There are 3 levels 
– level 1 being the most suitable for fair skin, and level 
3 for darker skin. 

When you use your IPL PRO™ for the first time, or after 
sun exposure, perform a skin test on each area that you 
are going to treat to check your skin’s reaction and to 
determine the correct light intensity level for each area.

1.  Select light intensity level 1 and place the device 

at a 90° angle on the skin you wish to treat so that 
the treatment window and skin sensors are in full 
contact with your skin. 

2.  In ‘MAnuAL’ mode, press the flash button to 

release a single flash of IPL.

3.  Slide the device over the skin to the next area to 

be treated.

4.  Increase the light intensity setting to level 2, and 

press the flash button again.

5.  Repeat this for light intensity level 3 on a different 

area of skin.

6.  Wait 30 minutes and check your reaction before 

proceeding with your treatment. Choose the 
highest setting that did not result in any skin 
reaction. 

IPL hair removal may feel like a warm tingling sensation, 
but should never hurt. Do not increase the light 
intensity level if you experience any discomfort during 
or after use.

IMPORTanT - PLeaSe Read

90˚

skin 

sensors

treatment

window

4

Summary of Contents for IPL Pro









Reviews: