HoW to use YouR
IPL PRo
™
1. Shave, short-trim, epilate or wax the hairs you wish to
remove. This ensures the IPL is absorbed deep into the
hair follicles.
See page 5 for guidance on using IPL to
remove facial hair.
2. Clean your skin, making sure it is entirely dry and free
from oils and creams.
3. Plug the power cable into a plug socket and press the
power button to turn on your IPL PRO™.
If this is your first
time using your IPL PRO™, see page 4 for the skin test.
4. Choose your light intensity level by pressing the light
intensity button.
5. Remove the IPL PRO™ device from the base unit and
press the flash button once to remove it from standby
mode.
6. Choose manual or automatic flash mode.
See page 6 for
guidance.
7. Place the IPL PRO™ device at a 90° angle against your
skin surface. Ensuring the treatment window and skin
sensors are fully against your skin.
8. If in
MAnuAL mode
: Press and release the flash button to
release a single flash of IPL. Glide your IPL PRO™ to the
next area and repeat.
If in
AuTO mode
: Press the flash button once to remove
it from standby mode, then press the treatment window
against the skin and the device will release several
flashes in a row. Slowly glide your IPL PRO™ across your
treatment area.
9. After 30 seconds of non-use, your IPL PRO™ will enter
standby mode. Simply press the flash button once to
continue. To turn your IPL PRO™ off, hold the power
button. It will automatically turn off after 10 minutes of
non-use.
10. For best results clean your device after each hair removal
session. Whilst unplugged, use a clean dry cloth to gently
wipe the outer shell, skin sensors and treatment window.
!
skin
sensors
treatment
window
90˚
3
