Misting/Dusting:
1. It is fine to carry out operation during cool weather with little wind. For example: in the early morning or
in the late afternoon. This can reduce the evaporation and drift of chemicals and improve the protecting
effect.
2. Operation should move windward.
3. If your mouth or eyes are spattered with chemicals, wash them with clean water and then go to see doctor.
4. If the operator has a headache or dizziness, stop working at once and go to see the doctor in time.
5. For the operator’s safety, missing/dusting must be carried out strictly according to the instruction of the
chemicals and agricultural requirements.
6. The operator should obey the instructions on the label when preparing the pesticide..
7. It is prohibited to use the special fluid, such as the strong acids or alkali, etc.
ASSEMBLY:
........................................................ ............
Assembly for spraying:
Remove the tow wing nuts fixed on the chemical tank and take down the tank. Change dusting lid plate for
spraying lid plate, then assemble the chemical tank and screw down wing nuts as shown in Fig.1.
Fig 1.
1. Nut
2. Dusting plate
Assembly in chemical tank:
Remove the lower cover of chemical tank, change into the pressing lid which is connected with rubber tube
(do not forget to put on the sealing ring, as Fig.3). Connect the lid to the rubber tube as shown in Fig.2.
Fig 2.
1. Sealing washer
2. Lid
3. Filter net
4. Tube
5. Rubber tube
6. Lower lid
7. Discharge opening
8. Spraying plate
Fig 3.
Vymeniť