EN
- Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account
the working conditions and the work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
5) SERVIS:
- Have your power tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tools is maintained.
MULTI-FUNCTION SHARPENER SAFETY INSTRUCTIONS
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
- Always wear protective equipment when working.
- Never operate the multi-function sharpener with cracked or damaged sharpening wheel. Always replace
cracked or damaged sharpening wheels immediately.
- Check and ensure that all the fastening screws, bolts and nuts are securely tightened prior to operating the
multi-function sharpener.
- The multi-function sharpener is not suitable for continuous operation. The motor can be switched off after
15 minutes due to heat heating. If this happens, allow the device to cool down for at least 10 minutes.
- The multi-function sharpener should never come into contact with liquids.
- Sparks are created when sharpening. Therefore, keep the device away from flammable materials.
- Never touch the sharpening wheels or processed material immediately after sharpening because it is very
hot and there is a risk of burns.
If the processed material colored to blue during sharpening, it is overheated and may be damaged. Regularly
cool down the processed material (e.g. with water).
- Never use an object to slow or stop the sharpening wheel whilst in motion.
- The multi-function sharpener may only be used with the work module installed
- The module must not be mounted or removed from the appliance while the appliance is in working.
