Strana 10
not be covered. Use only nozzles that are suitable for your unit.
Technical Data
Model
JS-HG12B
Voltage
(V)
220-240
Frequency
(Hz)
50/60
Power
(W)
2000
Switch position
0-1-2
Temperature
position 1
2
℃
350
550
Protection class
Ⅱ
/
double insulated
Intend use
When observing the safety rules and using the original accessories, this hot air tool is intended for
all applications with hot air that are listed in these operating instruction
Applications
Shrinking of shrinkdown tubing, solder connectors and solder terminals, packaging and electrical
components.
Deforming of articles made from acrylic, PVC, and polystyrene, tubing, plates and profiles, as
well as moist woods.
Welding of thermoplastic polymer, flooring materials of PVC and linoleum, PVC-coated fabric,
tarpaulins and foils.
Soldering of tin, special silver solder, SMD elements, cable lugs, and for loosening soldered
connections.
Paint removal –Removal of old and even thick coatings of oil paint, varnish and synthetic plaster.
Drying of colour shade samples, filter, adhesives, construction joints and stucco forms.
Joining adhesives-Large-surface gluing with contact adhesives, activation of pressure-sensitive
adhesives, acceleration of bonding processes, releasing of bonding points as well as releasing or
bonding of edge bond or venee.
Defrosting of icy stairs and steps, door locks, trunk lids, car doors or water pipes, as well as for
defrosting refrigerators and ice boxes.
Disinfection-With hot air of 600
℃，
you can quickly rid animal sties/stables of bacteria.
Woodworm infestation can be controlled (Caution: Danger of fire! Do not heat up the wooden
surface excessively).
Putting into operation
Observe the mains voltage: The voltage of the power source must agree with the value given on
the nameplate of the unit. Extension cords must have a conductor cross section of 2
×
1.5mm
2
min.
Switching on:
Set the switch to
Ⅰ
or
Ⅱ
, according to the application.
Switching off:
