ENGLISH
ULTRASONIC RODENT REPELLENT FOR CARS
OPERATING
- The Ultrasonic Rodent Repellent works on the principle of transmitting an ultrasonic signal to disrupt the
auditory and central nervous system of rodents.
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE
12 V
POWER SUPPLY
50
–
70 mAh
POWER CONSUMPTION
0,6 W
COVERAGE AREA
do 45 m
2
MATERIAL
ABS
ULTRASONIC FREQUENCY
22-45 kHz
SIZE (L x W x H)
6,8 x 2,2 x 11,5 cm
WEIGHT
125 g
PARTS OF THE PRODUCT
INSTALLATION AND OPERATION
- We recommend that the installation of the device is carried out exclusively by an auto service center.
Improper installation may cause a short circuit or electric shock.
- We do not recommend installing the device in damp areas.
- Install only when the car is parked and the engine is switched off.
- Fasten the device with tightening straps or screws in the engine compartment of the car, into a place where
it will not get dirty or in contact with water and where it can detect engine vibrations.
- Route the power cord to the car battery so that it does not touch any moving or hot parts of the vehicle.
EN
