Strend Pro 2212414, Instruction Manual

Page: 50 / 54

leak test
Blocked burner nozzle Clean or replace burner nozzle
UNEVEN HEATING FLAME
Blocked burner nozzle Clean or replace burner nozzle
The patio heater is not placed on
a flat surface Place the patio heater on a flat
surface
Insufficient fuel pressure Replace the gas bottle
WHEN USING THE HEATER FOR
THE FIRST TIME, YOU CAN
OBSERVE A SMOKE SMOKING
AND FEEL SMALL ODOR
Result of the production process
(evaporation of oil during
operation)
It stops after about 30 minutes of
operation
A THICK BLACK SMOKE COMES
FROM THE DEVICE
Clogged burner
Switch off the appliance and let it
cool down. Clean the burner
THE DEVICE MAKES AN
UNUSUAL (WHISTLE) SOUND
DURING OPERATION
Blocked vent opening
Check the location of the patio
heater. The minimum distance of
the heater from surrounding
objects must be at least 120 cm
from above and from the sides
Clean the vents
There is air in the gas pipe
Vent the piping by continuously
pressing the flow regulator until
you smell a faint gas odor
THE PATIO HEATER MAKES A
CLICKING SOUND WHEN
IGNITED OR SWITCHED OFF
Expansion of metals
It is a standard process. If the
sound is too loud, contact an
authorized service center
GAS SMELL CAN BE FELT, BUT
THE FLOW REGULATOR IS SET IN
„OFF“ POSITION
Gas leak Find the location of the gas leak
Damaged flow regulator Replace the flow regulator
GAS SMELL CAN BE FELT
DURING THE OPERATION OF
THE PATIO HEATER
Presence of foreign substances in
the gas or burner Check vents and burner. Clean if
necessary
The odor is caused by other
products located near the patio
heater Stop storing and using odor-
causing products near the patio
heater
Gas leak
Bad connection
between
regulator and
gas hose
Find the location of the gas leak.
Contact the gas cylinder
manufacturer
Bad connection
between
regulator and
gas cylinder
Damaged gas
hose
CARBON MONOXIDE
PRODUCTION
Dirt or coating on the reflector or
flame shield Remove dirt or coating from the
reflector and flame cover
MAINTENANCE AND STORAGE
- Proper maintenance is the basis for maintaining the original efficiency and operational safety of the
machine.
- Before cleaning the appliance, unplug it from the gas bottle and let it cool down.
- All repairs and service work may only be carried out by qualified personnel or authorized service.