SETTING CURRENT TIME
- Set the current time by turning the jog dial clockwise so that the current hour and minute are in the upper right corner (where
the arrow points).
- Minutes can only be set by 15 minutes (one division = 15 minutes).
SETTING SWITCHING PROGRAM
1. Push the divisions (segments) that are around the circumference of the adjusting wheel downwards. One panel switches the
mechanical switch socket for 30 minutes.
2. Connect the switch socket to the 230 V ~ / 50 Hz mains supply.
3. Insert the plug of the appliance into the socket.
WARNINGS
- Do not disassemble the mechanical switch socket, immerse it in water or any liquids.
- The mechanical switch socket should only be used in a vertical (vertical) position to maintain IP44 protection.
- If the mechanical switch socket needs to be cleaned, switch it off and clean it with a dry cloth.
- Do not leave connected electrical appliances unattended.
- The mechanical switch socket is not intended for use by persons (including children) whose physical, sensory or mental inability
or lack of experience and knowledge prevents its safe use, unless they are supervised or instructed in the use of the appliance by
a person responsible for their safety. Take care of the children to ensure that they cannot play with the product.
ENVIRONMENTAL PROTECTION
Packaging materials are recyclable. Please do not dispose of the packaging materials in the municipal waste, but hand
them in at a collection point for secondary raw materials.
Discarded devices contain valuable recyclable substances that should be reused. Therefore, please hand over
old equipment to a suitable waste collection point. Electrical and electronic devices often contain components
that can pose a potential hazard to human health and the environment if mishandled or disposed of. However,
these components are required for proper operation of the device. Devices marked with this symbol must not be disposed of with
household waste.