Streetwize Accessories
Sales enquiries:
Technical enquiries:
www.streetwizeaccessories.com
TO CHECK AIR PRESSURE
You may obtain a pressure reading from the gauge mounted on the compressor. As the gauge
needle will tend to vibrate during operation, you may want to switch the compressor off
momentarily to steady the needle.
INSTRUCTIONS IF COMPRESSOR FAILS TO START
NOTE:
If the 12v power socket doesn’t work from its socket, your compressor won’t work from
it either. If your compressor does not start, check the following
1. Foreign matter may be lodged in 12v power socket well. Scrape it off carefully with a piece
of wood. Insert plug once more and turn several times to make good contact.
2. 12v power socket fuse may be worn or weak. If so replace with a new 15 amp fuse.
3. Some 12v power sockets have a circuit breaker located directly behind 12v power sockets.
It may have blown and should be replaced.
M17 1RY
CAUTION:
1. Do not inflate items beyond their needs. To avoid over-inflation carefully follow
instructions on articles to be inflated. Do not exceed recommended pressures. Use the
pressure gauge to check for the correct pressure.
2. Bicycle tyres and other small articles will inflate relatively quickly. Be particularly careful
not to over inflate.
3. Recreational items such as beach toys and air mattresses require low pressure.
Inflate until firm.
SWSWAC17 Manual AW 2016.qxp_Layout 1 14/06/2016 09:03 Page 2
