StreetStrider Eclipse, Owner'S Manual

Page: 6 / 19

6 Street Strider Eclipse and JET Owner’s Manual
2. Hardware – B. Hardware List i .
The hardware parts of the StreetStrider Eclipse are listed and labeled in the following table and figures. The
hardware parts of the StreetStrider JET (not shown) are identical to the Eclipse.
Table 2B-1. StreetStrider Eclipse Hardware List. Hardware parts are lettered in the following figure.
M=OD of threads, mm L=length W=wrench fit, mm Dimension
Key P=pitch, threads/mm H=OD of head T=washer thickness, mm
ITEM
BOLTS, SCREWS, NUTS,
WASHERS DIMENSIONS # MAINTENANCE
ROUTINE
A Hex bolt on strider pole pivot, joint #1 M6 x P1.25 x L20 x H12 x W6 2 Tighten
B Washer under bolt on joint #1 OD25 x ID9 x T2 2
C Hex barrel on lower strider pole clevis,
joint #2 M6 x P1.0 x L50 x H14 x W6 2 Snug but allow joint
movement
D Screw for hex barrel on joint #2 M5 x P1.0 x L12 x W5 2 Snug but allow joint
movement
E Hex shoulder bolt pedal spindle, joint #3 M8 x P9/16” x L50 x H25 x W8, 18 mm OD
shoulder 2 Tighten, left LH,
right RH
F Hex bolt on crank arm and hub spindle M8 x P1.0 x L15 x H12 x W8, 18 mm flange 2 Tighten
G Bolt through steering knuckle, king pin M12 x P1.5 x L105 x H25 2 Snug but allow
knuckle swivel
H Nut for king pin M12 x P1.5 x L12 x W19, nylon lock 2 Snug but allow
knuckle swivel
I Washer under nut of king pin OD24 x ID13 x T1 2
J Hex barrel for head tube fold joint pivot M5 x P1.0 x L60 x H12 x W5 1 Tighten
K Screw for hex barrel of fold joint M5 x P1.0 x L12 x H12 x W5 1 Tighten
L Hex bolt as turning stopper on front beam M5 x P1.0 x L25 x H10 x W10 2 Tighten
M Nut for turning stopper bolt M5 x P1.0 x L5 x W10 2 Tighten
N Nut for rod end stud, inboard and
outboard M8 x P1.5 x L10 x W14 4 Tighten
O Nut for steering linkage jam to rod end M8 x P1.5 x L10 x W14 4 Tighten, inboard LH,
outboard RH
P Hex bolt on front beam pivot M10 x P1.5 x L25 x H15 x W8 1 Tighten
Q Nut for front axle M12 x P1.5 x L12 x W19, nylon lock 2 Snug but allow
wheel rotation
R Hex screw for bottle cage M4 x P0.8 x L12 x H10 x W4 2 Tighten
S Hex screw fixing foot platform M4 x P0.8 x L12 x H10 x W4 14 Tighten
T Hex screw mounting fender M4 x P0.8 x L12 x H10 x W4 7 Tighten
U Hex screw for drop out lock plate M4 x P0.8 x L12 x H10 x W4 4 Tighten