StreetCam Vehicle recorder, User Manual

Page: 15 / 38

15
To install the Panic Button extension cable:
1. Remove rubber cover on the side of the unit with a
thin, rigid object
(Figure 1) .
2. Insert the end of the panic button extension into
the
EMGCY port (Figure 2) .
3. Run the cable along the dashboard to conceal the
cable out of view.
4. Remove the double-sided adhesive on the back of
the panic button, and stick on surface
(Figure 3) .
NOTE: The end of the panic button extension con-
nects one way into the EMGCY port. Do not force.
The Emergency button extension allows you to bookmark an event as an "Emergency" for
easy searching in the StreetCam Viewer. Emergency recordings capture video at 30 frames
per second (FPS) for enhanced detail. Place the emergency button extension where you can
easily reach.
Installing an Emergency Button
Using the Emergency Button
The emergency button engages the StreetCam to record at maximum quality, and marks the
event as Emergency" when viewing the file in the StreetCam viewer.
When you press the
emergency button:
The video automatically pre-records and post records a set duration that you can config-
ure.
The video is tagged as an "Emergency" event that you can later search and categorize the
video using the included StreetCam Viewer. The video records at maximum resolution (30
FPS).
Figure 1
Figure 2
Figure 3