This document contains proprietary and copyrighted information subject to change without notice. The information in this
document shall not be duplicated, used, or disclosed in whole or in part outside of MAI Media Group © 2015. Any distribution
of this material without the written consent of MAI Media Group is strictly prohibited.
- The number of impact occurrence in Parking mode is shown on the LCD screen when
you start the vehicle. It helps to notify you that there may be relevant video files to check.
- Impact based event files while parked are stored separately in the EVENT folder.
- If you do not require automatic switching to parked mode, please disable this in the
configuration.
- Once in Parked Mode, the system automatically reconfigures its impact sensitivity to the
most sensitive setting in order to register even the slightest impact/bump.
- No audio is recorded in parked mode.
- To use the parked mode, the product has to be connected directly to the power source as
there are no internal batteries in the recorder other than the EDLC which is a capacitor
providing a temporary power supply to ensure that the latest video is correctly stored to the
SD card on the recorder being shutting down.
When connecting the unit to permanent power we recommend the use of a
professional mobile installation service to assist with the wiring.
- Extensive and continuous use of the vehicle’s power source may exhaust the main battery.
The company is not liable for damages related to continuous use of the product for more
than 24 hours. We recommend that full power be shut off after continuous use of 2~3 days
for maintenance purposes.
■ Use of SD Card
- To eject the SD card from the product, the engine has to be turned off and the key should
be removed from the ignition (all power should be removed from the device). A few
seconds after the key has been removed, the product automatically turns off and the LED’s
will all go out. Remove the SD card only when all LED’s are off (The built-in back up
capacitor helps the last file to be stored into proper folders before the product is completely
turned off.)
- If there is no SD card in the product, it needs to be inserted before you drive your vehicle
to enable recording. There is no internal storage in the product other than the SD card.
- Use only SDHC compatible SD card readers to read the SD(HC) card in your PC.
- You need to insert the SD card or replace the inserted SD card when "Please insert an
SD card" is displayed due to the absence of an SD card or unformatted SD card.
- SD card readers can be purchased at any computer accessory store or from your
StreetCam HD agent/dealer/distributor.
- Regular maintenance applied to your SD card helps to prevent or resolve bad sectors and
malfunctions. Run a defrag or error checking operation to maintain stable and effective
usage of the SD card.
!! If you want to format SD cards larger than 32GB in your windows based computer,
please use a 3
rd
party program that will make them FAT 32 compatible.
■ Automatic System Check and Safe Rebooting Function
- This product is programmed to automatically check and reboot the system if the product
is in a non-functional state. By rebooting the system, the product notifies the user that a
check has taken place.
- By safeguarding the system in this manner, the stability of the system is reinforced.
The system might keep rebooting repeatedly when the software installed in the SD card
has been damaged or altered. In this case, please turn off the system and format the SD
card then install the latest Software to return the SD card to a like new state.
■ Voice Recording