Settings
The DVR is pre-set with logical default settings and is ready to
operate with minimal adjustment required, when powered on the
internal capacitors will charge, the DVR will then power up and
recording will commence.
[Note] The DVR does not contain a battery and will need to be
connected to a power source to configure settings,
connecting to a
computer USB port is not supported.
Before operating adjust the time settings, long press the
MENU/DOWN
key to stop recording and enter the
SETUP
submenu,
press the
Menu/down
key to scroll down to the
date/time
menu, press the
OK/enter
key to enter and adjust accordingly, if
using the optional GPS it is only necessary to adjust the
timezone
[Note] The GPS signal carries time and date information for GMT 0,
the time offset to suit your region is set by the DVR, if you are in a
region that supports daylight savings offset it will be necessary to
adjust the time zone at the beginning and end of the period
accordingly.
