1. Select a suitable mounting location, if using the adhesive mount
ensure the window is clean prior to application, remove the backing
tape and press and hold the bracket firmly against the glass for 2
minutes, then wait 20 minutes before attaching the camera. The
adhesive will achieve 50% bond after 20 minutes, 100% bond is
achieved after 72 hours, if the camera is attached to the bracket too
soon after installation the adhesive may not bond correctly.
2. Fix the power and (optional) GPS cables properly and route cables
across the passenger side where possible to prevent the line of sight
from being affected.
[Note] The AV-OUT cable should only be connected if using an
external monitor for display
3. Insert the USB connector of the vehicle charger into the USB
interface of the DVR before attaching the camera to the bracket.
4. If using the optional GPS it may be an on glass GPS antenna or a
dashtop GPS antenna. The GPS should be mounted correctly
according to which type of GPS antenna you have.
