1. Once a suitable mounting location is decided secure the DVR
mount bracket to the windshield using the provided 3M adhesive
tape, ensuring the window is clean prior to application, remove the
backing tape and press and hold the bracket firmly against the glass
for 2 minutes, then wait 20 minutes before attaching the camera.
The 3M adhesive tape will achieve 50% bond after 20 minutes, 100%
bond is achieved after 72 hours, if the camera is attached to the
mount bracket too soon after installation the adhesive may not bond
correctly to the glass.
[Note] The cables should be connected to the camera before
attaching the camera to the mount bracket, when determining the
mounting location be sure to leave adequate room above the camera
to be able to detach the camera while the cables are in place.
2. Fix the power and GPS cables properly and route cables across the
passenger side where possible to prevent the line of sight from being
affected, if using the optional cable cover be sure to align the cables
correctly.
[Note] The AV-OUT cable should only be connected if using an
external monitor for display
