© Street Furniture Australia Pty Limited
ABN 46 070 910 100
streetfurniture.com
Australia 1800 027 799
United States +1 877 406 6434
International +61 2 8774 8888
5
Email [email protected]
N6 391 Park Road, Regents Park
NSW 2143, Australia
assembly instructions (3/3)
HOW TO INTEGRATE THE POWERME™ TABLE
If your Aria configuration includes a PowerMe™ Table, please follow the
steps below.
1. Remove products from packaging (ARIA 2S-PM-2S shown).
2. Connect the PowerMe Table/s to power.
This work must be carried
out by a qualified electrician.
Once the power is connected and
working the table can be fixed into place.
3. With PowerMe Table fixed in position - assemble the Aria Seats or
Benches into place according to your configuration as seen in
Fig. 2
.
4. Insert each opposing axle into the round key opening of the
PowerMe pedestal leg and ensure they meet face to face aligned to
the centre. Firmly tighten the 2 x M10 Hex Bolts using an Allen key
to fix the seats and/or benches in place, see
Fig. 3
.
5. Once the seat assembly is fixed together, proceed with surface or
sub-surface fixing it in place.
Tighten the two bolts in the
pedestal leg to clamp the
PowerMe Table in place.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
