© Street Furniture Australia Pty Limited
ABN 46 070 910 100
streetfurniture.com
Australia 1800 027 799
United States +1 877 406 6434
International +61 2 8774 8888
1
Email [email protected]
N6 391 Park Road, Regents Park
NSW 2143, Australia
Welcome to the Aria System. Congratulations on
your purchase from
Street Furniture Australia.
As Aria and its components are a modular system, there are many
configurations that can be customised. The following installation guide
is a general guide only and does not refer to your specific configuration.
Details will be provided separately on your chosen configuration and its
layout.
Before beginning installation please read through this guide thoroughly.
Important to note:
• Please ensure you have the correct configuration and components
before beginning, this information will be provided by our sales team.
• If you have purchased a PowerMe™ Table you must have a licenced
electrician perform the site preparation and installation.
• Ensure the orientation of the Aria Seats and Benches is correct before
fixing. Please refer to your site plan.
• Ensure the area where the seating is to be fixed is prepared and as
level as possible.
• Masonry bits and mounting fixtures are not included.
• Take care when handling the products to ensure no scratches, dents
or other damage occurs.
• In some cases the seats or benches will arrive with the axle and legs
removed, instructions for assembling these is on page 3.
understanding aria
Your Aria configuration comes with a code to identify its layout. It is important to understand this to ensure the
right components are received and layout is successful.
See below how to read your code:
1
2
3
S
B
R
C180
C90
C45
PM
CODE
1 Seater (600mm)
2 Seater (1200mm)
3 Seater (1800mm)
Seat (with backrest)
Bench (no backrest)
Reversed
Connector Panel 180
°
Connector Panel 90
°
Connector Panel 45
°
PowerMe™ Table
DESCRIPTION
read left to right
2S-PM-2S-C45-2B
2S
PM
2S
2B
C45
