53
17.8.2
S
PECIAL
O
PERATIONS
/
S
ETTINGS
Within this chapter, the system parameters can be altered to suit
onsite requirements.
The adjustable settings are:
1. Comfort Setpoint.
2. Reduced Setpoint.
3. Protection Setpoint.
4. Characteristic Curve Slope.
5. Summer / Winter Heating Limit.
The parameters adapt the plant to meet your needs.
The Albatros heat pump and QAA74 controller manual provided technical details of these parameters.
Proceed as follows to change regional settings:
1.
Turn the control knob and select the "Settings".
2.
Press the control knob.
'Special operations' opens. The title of the settings page is preselected.
3.
Push the control knob to select the setting page title.
4.
Turn the control knob to go to other setting pages.
5.
Push and turn the control knob to go to the work area of a setting page.
6.
Set the values as per the needs of your building or living zone.
7.
Exit the settings page with "Back".
17.8.3
E
XPERT
L
EVEL
-
OEM
The OEM under the Expert level allows the engineer for full diagnostics, complete parameter access and to start the
commissioning wizard
This must not be accessed by the onsite user
– please contact Strebel Technical if this is required to be
accessed without an expert / engineer onsite.
To access the expert OEM within the Expert chapter:
1.
Turn the control knob and select "Expert".
2.
Press the control knob - The login dialog box opens. The user level setting is preselected.
3.
Press the control knob - The user level is selected and is displayed inverted.
4.
Turn the control knob to select the OEM level.
5.
You must turn the control to “password entry” once OEM is selected.
6.
Press the control knob
– The first digit position is selected.
7.
Turn the control knob to enter the first digit of the OEM password.
8.
Press the control knob to confirm entry
– The second digit is selected.
Summary of Contents for S-ASX 30
Page 2: ...2 ...
Page 24: ...24 10 CORRECTIVE FACTORS 10 1 Heating Performances ...
