All main parts and safety devices are assembled by the manufacture. Some other secondary parts
may be supplied separately. These parts must be assembled by the user following the
assembly instructions
Assembling the System
To use your
HIGHLINE™
high pressure system,
i.
Remove all
RED
travel plugs from the
pump and gearbox (if fitted), and re
place with yellow-topped dipsticks.
Check all oil levels and top up
if needed.
iii.
Connect the suction hose to the high
pressure pump, ensuring there is no
air leaks. Air leaks will reduce the
suction quality and impair the
performance of the machine.
ii.
Fill engine with oil and fuel, see engine
manufacturers handbook for details
of oil and fuel types. If needed please
call
STREAMLINE®
Technical Support.
iv.
Submerge the brass weighted filter in
a suitable container, containing the
water supply. It is important to ensure
the filter is kept below the water line
for a smooth operation.
v.
Connect the high-pressure hose to the
pressure washer and to the appliance
used. Tighten as appropriate but do
not over tighten. Ensure the safety
catch is in the ON position whilst
making these connections.
You are now set up ready to proceed.
HIGHLINE
™
10
W: www.streamline.systems E: [email protected] T: +44 (0)1626 830 830
W: www.streamline.systems E: [email protected] T: +44 (0)1626 830 830
11
