This 600GPD filtration system is very efficient at reducing water hardness
and is simple to install and maintain.
It is the installer’s responsibility to ensure that this appliance is plumbed in
accordance with local authority’s bye-law regulations.
INSTALLATION INSTRUCTIONS
Unscrew the three vertical filter bowls and
remove the wrapping from the cartridges
and reassemble.
A filter spanner is included in the kit for loos-
ening the filter bowls. Do not over tighten the
filter bowls when re-assembling.
Connect a water supply hose to the fitting
marked ‘Mains inlet connection’ (See Fig 1)
Alternatively a Hozelock type connection kit
can be purchased to simplify the hose con-
nection. (Part no. KIT 01600 Brass fittings kit
or KIT01601 Nylon fittings kit).
Water Inlet Connection
Cut and connect a suitable length of ¼”
tube to the waste water connection which
is marked DRAIN. (See Fig 2) This tube is
the waste water tube and must discharge
into the nearest drain. Cut and connect a
suitable length of ¼” tube to the connec-
tion market ‘FAUCET’ (See fig 2) This will
discharge pure water into the storage tank.
Drain
RO
Inlet
Connection
Faucet
Identify the small RO plug which is packaged in each RO membrane bag.
VERY IMPORTANT
Lubricate the o rings and insert this plug
into the notched side of the centre white
tube of each membrane. (See Fig 3)
Fit Plug
in here
RO Plug
