Congratulations on your purchase of the Streamlight
®
VANTAGE
®
helmet mounted LED flashlight. As with any
fine tool, reasonable care and maintenance will provide
years of dependable service. Please read this manual
before using your VANTAGE. It includes important safety
and operating instructions and should be saved.
IMPORTANT
Batteries
WARNING: FIRE, EXPLOSION, BURN HAZARD
USE ONLY:
Streamlight, Panasonic, or Sanyo size CR123A;
Duracell 123A, or Energizer 123. Use of other batteries or
mixing of used and new or different brand batteries may
result in leakage, fire or explosion and serious personal
injury. DO NOT recharge, misuse, short circuit, improp-
erly store or discard, disassemble, or heat above 212°F
(100°C). Keep away from children.
USE ONLY THOSE BATTERIES SPECIFICALLY
RECOMMENDED FOR USE IN THIS PRODUCT.
LED
Caution – LED Radiation
Do Not Stare Into Beam
Class 2 LED Product: White
Max. Output < 60 mW
Per IEC 60825-1 Ed 1.2 2001-08
Battery Installation/Removal
Orient the helmet
clamp
90 degrees
to the body
to allow
the battery door latch
to operate.
1. Unclip the battery
door latch (use a
coin if necessary).
2. Slide discharged
batteries from the VANTAGE.
3. Insert fresh batteries observing polarity.
Note: The VANTAGE is polarity protected and will not
light if the batteries are inserted incorrectly.
Battery Door/Switch
Battery Door Latch
Slot
Tab
