SAS310
19
6
Testing the SAS310
To test the SAS310, you must first plug it in. Then, while on the same local network as the SAS310, go
to the Streamit device register (
http://register.streamit.eu/sas
) using a PC or tablet. The SAS310 should
be listed there after at most one minute. If the SAS310 does not appear in the device register, the
The
configuration interface of the SAS310 is not available
article will provide alternatives to solve the network
configuration.
Next, connect an audio signal into the Behringer UCA222's audio input as described in
Connecting the
SAS310 to the audio system
. Then, configure a stream as described in
Stream settings
. The configured
stream should appear in the web interface of the remote streaming server or be playable from the local
network, depending on the configuration.
