LUKAS II
User‟s manual
September 2009
Version 1.2
4
EN
GLI
SH
EN
GLI
SH
EN
GLI
SH
1 Getting Started
1.1
First and foremost…
thank you for purchasing the Lukas II internet radio device.
The Lukas is a fully autonomous working receiver that makes it possible to listen to broadcasts of
radio broadcasters, music distributors, churches and much more. The Lukas is suitable for
connecting to a phone line as well as to an ethernet network.
The Lukas can be used with a number of preconfigured providers. However, you also configure
the device yourself with the Streamit Terminal Program (STP), a user friendly software application
for Windows PC. This program can be downloaded from our website free of charge. Uniquely the
Lukas can identify itself, so the user is able to participate in authorized broadcastings.
For more information on the Streamit products and solutions, we invite you to visit our website
http://www.streamit.eu
.
Finally, we wish you a lot of pleasure using your Lukas device
…
Streamit B.V.
1.2 Lukas support
With this manual we have tried to clearly describe the operation your Lukas. But we can imagine
you have a question or came across an issue which is not covered in this manual. In such case,
you are welcome to visit our website (
http://streamit.eu
) where you will find up-to-date
documentation and the latest software release(s).
When you have purchased your Lukas from one of our local dealers, we recommend you contact
your dealer first.
1.3 Unpacking your device
Carefully take out of the package the device and the supplied materials. Make sure that all of the
following components are included:
Lukas II internet radio device
Remote control
9V-800mA or 9V-400mA power supply
3M RJ 45 ethernet cable
3M RJ11 telephone line cable
Telephone connector (not in all versions)
The CR2025 Lithium battery is already in the remote control. Before you can start to use the
remote control, the paper-thin plastic separator must be removed (pulled out).
