Troubleshooting
Make sure before pressing the RECORD button that the input
source is turned on and is providing A/V signal to the iRecord.
Make sure that the A/V cables are securely connected to both the input
source and the iRecord.
The iRecord device will power off automatically after 10 minutes of no
activity.
If status LED does not illuminate on power up, do a power cycle again,
i.e. turn off iRecord, wait 10 seconds, turn on iRecord.
If your iPod
® or USB storage device is not recognized by th
iRecord after 30 seconds (status LED does not turn green) ry the
following steps:
1) Remove and re-insert iPod, PSP® or USB device.
2)
Power off iRecord, wait 10 seconds, power on iRecord.
3) Reset iPod. (Please see your iPod user manual)
4) Make sure PSP® is in USB mode.
,
PSP
e
t
13
Page 17
Summary of Contents for iRecord
Page 1: ...Personal Media Recorder USER MANUAL In one touch iRecord TM ...
Page 2: ......
Page 27: ......
