Manual-S28-GUI-16CH-2013_Q3
More information
www.streamaxtech.com
Copyright
2012-2014, Streamax Technology Co., Ltd
All Rights Reserved
All specifications are therefore subject to change without notice.
This function only can be active when the MDVR connected with inertial sensor.
OVER SPEED:
If the vehicle exceeds the high speed limit, MDVR will trigger the alarm signal (when the
following option ALARM set as YES) until the driver slows down the speed
LOW SPEED:
If the vehicle exceeds the low speed limit, MDVR will trigger the alarm signal (when the
following option ALARM set as YES) until the Admin password is entered to acknowledge the
alarm.
3.2.4.4
ACCELERATION
There are 3 values for G force inertial sensor: X, Y, and Z. X indicates forward and backward. Y indicates
left and right and Z indicated up and down. Threshold is the limitation for the value, if the value large than
the setting in the menu, then MDVR will trigger alarm.
3.2.4.5 TEMPERATURE
Inspection for temperature.
If the MDVR working temperature is higher than the setting for
HIGH TEMP
, MDVR will trigger alarm.
If the MDVR working temperature is lower than the setting for
LOW TEMP
, MDVR trigger will alarm
.
