Manual-S28-GUI-16CH-2013_Q3
More information
www.streamaxtech.com
Copyright
2012-2014, Streamax Technology Co., Ltd
All Rights Reserved
All specifications are therefore subject to change without notice.
User default password is 22222222, and Admin password is 88888888.
OPERATOR PASSWORD indicates permission is limited to video, sensor menu.
ADMIN PASSWORD indicates full access to MDVR.
SUPER PASSWORD indicates full access to MDVR under the circumstance of losing the password and
modifies the MAC address.
S28 MDVR GUI is semi-transparent; you can see the video from each camera when you make GUI
configuration
Please make sure you lock the removable hard disk case before connect the power for MDVR,
otherwise the MDVR cannot boot up.
2 SYSTEM START UP
After connecting the MDVR to a vehicle power supply, turn on the vehicle ignition and the unit will
automatically start up
.
Power is normally supplied to the MDVR as long as the vehicle ignition is ON.
“Display only view” of the cameras is immediately available to be viewed in quad mode. Normally, the
power supply for MDVR is about 12V/5A, without any accessories.
System Login for Setup
If password is disabled, press SETUP key on the handheld controller into the setup menu directly;
If password is enabled, press LOGIN/LOCK OR ENTER key on the handheld controller, the setup menu
will appear:
DEVICE NO.:
The unit ID of MDVR. You can setup the ID for the MDVR in the menu REGISTER INFORMATION.
After setting, the ID number will appear automatically on the login screen. It
’s the number in the
bracket
PASSWORD:
Enter the admin password or user password.
