5
Countertop Installation
Connect the Stream Nano Drinking Water System on the countertop next to the sink by using the existing
faucet and the chrome diverter valve included.
The Stream Nano unit has been shipped with all needed accessories and fittings for installation.
If you need help, contact us online at StreamFilters.com or (888)-615-5733.
Countertop Installation
A. Preparing the Housing
NOTE:
The filter cartridge is factory-installed inside the unit housing.
The Nano unit is for countertop use only.
1.
Inspect your Stream Nano System to confirm that it has
been received in good condition and that all parts are included
(see diagram and parts list).
2.
Determine the desired location of your countertop for the
unit so that the hose can easily be attached to your faucet.
3.
Inspect the unit housing to confirm that the housing top
is securely connected to the bottom.
a.
With the housing upright, slide the hand tool over the
top so that the ridges on the tool fit into the grooves on
the housing top.
b.
Turn the hand tool clockwise until it is tight. Be sure
to hold the base in place on the countertop while turning
the top.
B. Connect the Hose to the Housing
To connect the hose to the housing, simply insert the
stems on the end of the hose into the inlet and outlet ports as
far as they will go. The larger stem will go into the bottom port
(the inlet connector) and the smaller stem will go into the top port
(the outlet connector). Be sure to give a second push to make sure
they are all the way in.
02
Sec.
