4.3 Assembly Steps – Motor Mount
Step 1.
Loosen the two screws before insert the
motor mount to the Carbon Arm Boom.
Step 2.
Insert the Motor Mount to the carbon boom
and stop until the boom edge is around 5mm
to the Inner Motor Metal Mount surface.
Step 3.
Adjust the Motor Mount to parallel to the
Streak 800Pro body before tighten the
screws.
Step 4.
Secure the Motor Mount by tighten the
screws on the Metal Mount.
Repeat Step 1 to 4 to install other Motor Mounts to the Carbon Boom Arms.
10