Installing PCI Card (Optional)
The FC5 Evo can accept either a half height or full height expansion card. When installing a half height
card, you only need to remove the low profile blanking plate (A). When installing a full height card, remove
both blanking plates and the low profile support (A+B)
Fit the PCI card into the opening and secure it in
place with the PCI bracket screw. If you are
having trouble fitting the card, try removing the
screws shown in red. After the card fits into the
opening, replace the screws and bracket.
A flexible riser card is required to connect the
card to the motherboard (the riser card is not
supplied with the chassis)
INSTALLING PCI CARD - P13
A
B
Low Profile Support
M3 x 4
M2 x 4
M3 x 4
M3 x 4
B
B
Summary of Contents for FC5 evo
Page 1: ......
Page 15: ...NOTES P15 ...
Page 16: ...Melbournestraat 56 3047 BJ Rotterdam The Netherlands www streacom com V1 12 09 ...