Install a PCI Expansion Card
The DA2 supports a full-length dual slot expansion card. To install a card, begin by removing the pre-installed PCI blanking plates which are secured to the PCI
mount by a single screw for each plate. From the inside of the case remove the single screw which secures the PCI mount to the back of the case. The brackets and
PCI mount will now be loose and can be removed from the case.
Align the expansion card with the edge of the motherboard PCI slot at an angle so that the back of the card clears the PCI mount opening, then slowly insert the card
so that its correctly seated in the PCI slot. The card is then locked in place by replacing the PCI mount using the same single screw from the inside, then attaching the
card to the PCI mount.
PCS-M3x8
PTC-M3x5
12
PCI Mount
Blanking Plate
