Stratus SAE-S66M, Manual

Page: 12 / 20

12
7 - Maintenance and inspection of equipment
No. Item Method Period
1
Arm Safety lock Gear
Assembly
Manually check arm safety lock teeth for occlusion and complete lock. Everyday
2 Spiral base Check the lift arm, clean and replace the rubber base. Everyday
3
Oil Cylinder and Oil
pipe joint
Before using the lift, check for oil leakage Everyday
4
Safety lock combina-
tion Check that the safety lock can be unlocked and unlocked synchronous-
ly.
Everyday
5 Limit Switch
Press the up button, when the gear limit is in effect, whether the lifting
stops the up movement.
Everyday
6 Power unit
Inspect unloading valve for leakage. If leakage occurs, clean or replace
the unloading valve.
Everyday
7 Slide track
Lubricate the chain with N0.1 lithium based grease. No obstruction on
the track.
Every three month
8 Chain and pin Lubricate the chain with N0.1 lithium based grease. Every three month
9 Wholeness
The amount of load or no - load lifter several back and forth, lifter
should run stable sound.
Every three month
10 Hydraulic oil
Replace Hydraulic Oil 6 months after first use and annually thereafter.
Check the cleanliness of the hydraulic oil, if the hydraulic oil blackened
Every year