11
6
-
Operation
and
commission
of
equipment
6.1
-
Instructions for operating
6.1.1 Check all joints and tubing connections. The machine can only be used if there is no oil leak.
6.1.2 If the safety device of the lift fails, it must not be put into use.
6.1.3 If the center of gravity of the repaired vehicle is not located in the center of lift range, Anybody can not operate
the lift, otherwise the manufacturer and dealers do not bear any consequences.
6.1.4 The operator and other staff must stand in a safe area during the lift’s ascent and descent.
6.1.5 When the arm is raised to the required height, the power must be turned off to avoid misoperation by non
-
operators.
6.1.6 Make sure the safety lock is in bite position before working under the car. All personnel shall not be under the
vehicle while the lift is going up and down.
6.2
-
Operation Flow
To avoid damage to personal property, only trained personnel can operate the lift. Before lifting the vehicle, read the
operation instruction and teat operation of the lift to be familiar with the control of the lift. Always use four lifting pal-
lets to lift the vehicle. Do not lift only one end or end of the vehicle.
6.2.1
-
Lift Up
1.The vehicle sops, moves the lifter, moves the lifter under the vehicle; or the lifter does not move, the moving vehicle
passes the lifter and stops to the proper position.
2. Swing the lifting arm to the car’s center of gravity is at the center of the four lifting arms.
3. To turn on the power switch, gently press the up button on the power unit until the lifting arm pad touches the sup-
port point of the car.
4. Keep going up, get the car off the ground a little bit, and then check the car’s position again.
5. Rise to the required height, check whether the car is safe, and then press the lock button on the electronic control
box so that the safety lock in place, then workers can work under the car.
6.2.2
-
Lifter down
1. Make sure there are no people or other obstacles under the car before you descend.
2. Open the power switch, press the drop button on the power unit the machine will automatically rise about 5cm, out
of the safety, electromagnet work, lift down.
3. After the lifting arm is completely lowered, the mobile lifting arm leaves the car or the retractable arm drives the car
away.
Summary of Contents for SAE-S66M
Page 6: ...6 4 2 Shape and size of equipment...
Page 20: ...20...
