Stratus ftServer 2600, Site Planning Manual

Page: 19 / 98

System Documentation
Site Planning for ftServer 2600, 4500, and 6300 Systems
1-7

Tables 2-5 and 2-6 (if you are using PDUs) or Tables 2-7 and 2-8 (if you are not
using PDUs), worksheets for determining the number of external power outlets
required

Appendix B, “Electrical Circuit and Wiring Information”

Any notes you have about site planning
❏
Have you reviewed and discussed the requirements with the facilities personnel
and contractors to ensure that all site modifications are understood and
implemented?
If you have any questions about the number and types of components, contact your
Stratus account representative or distributor.
System Documentation
Table 1-2 lists the hardware documents for ftServer 2600, 4500, and 6300 systems,
and the tasks described in each document. Also see Table 1-3 (for Windows systems)
or Table 1-4 (for Linux systems) or Table 1-5 (for VMware ESX systems).
Table 1-2. ftServer 2600, 4500, and 6300 System Documentation
Document Task
Stratus ActiveService Network
Configuration Guide
(R072)
Configure your system for support by the ASN
Stratus ftServer Systems: PCI Adapter
Guide
(R461)
Install, configure, replace, or troubleshoot PCI adapters
Stratus ftServer Systems: Technical
Reference Guide
(R550)
Consult technical reference information for ftServer
systems
Change BIOS settings in the ftServer Setup program
Stratus ftServer Systems: Peripherals
Site Planning Guide
(R582)
Find information about optional equipment that you have
ordered with your system that is needed to complete site
preparation
Stratus ftServer 2600, 4500, and 6300
Systems: Operation and Maintenance
Guide
(R639)
Start up, shut down, and operate your system
Troubleshoot system hardware
Remove and replace CRUs, including PCI adapters
Stratus ftServer 2600, 4500, and 6300
Systems: Hardware Installation
Guide
(R640)
Install your system, including mounting the system in a
cabinet