S
AFETY
I
NFORMATION
S
YSTEM
A
CCESS
W
ARNINGS
3
-4
Power Cord Warnings
If an AC power cord was not provided with your product, pur-
chase one that is approved for use in your country.
System Access Warnings
CAUTION!
T
O
AVOID
ELECTRICAL
SHOCK
OR
FIRE
,
CHECK
THE
POWER
CORD
(
S
)
THAT
WILL
BE
USED
WITH
THE
PRODUCT
AS
FOLLOWS
:
Do not attempt to modify or use the AC power cord(s) if
they are not the exact type required to fit into the grounded
electrical outlets.
The power cord(s) must meet the following criteria:
The power cord must have an electrical rating that is greater
than that of the electrical current rating marked on the prod-
uct.
CAUTION!
T
HE
POWER
CORD
MUST
HAVE
SAFETY
GROUND
PIN
OR
CONTACT
THAT
IS
SUITABLE
FOR
THE
ELECTRICAL
OUTLET
.
CAUTION!
T
HE
POWER
SUPPLY
CORD
(
S
)
IS
/
ARE
THE
MAIN
DISCONNECT
DEVICE
TO
AC
POWER
. T
HE
SOCKET
OUTLET
(
S
)
MUST
BE
NEAR
THE
EQUIPMENT
AND
READILY
ACCESSIBLE
FOR
DISCONNECTION
.
CAUTION!
T
HE
POWER
SUPPLY
CORD
(
S
)
MUST
BE
PLUGGED
INTO
SOCKET
-
OUTLET
(
S
)
THAT
IS
/
ARE
PROVIDED
WITH
A
SUITABLE
EARTH
GROUND
.
!
!
!
!
CAUTION!
T
O
AVOID
PERSONAL
INJURY
OR
PROPERTY
DAMAGE
,
THE
FOL
-
LOWING
SAFETY
INSTRUCTIONS
APPLY
WHENEVER
ACCESSING
THE
INSIDE
OF
THE
PRODUCT
:
Turn off all peripheral devices connected to this product.
Turn off the system by pressing the power button to off.
Disconnect the AC power by unplugging all AC power
cords from the system or wall outlet.
Disconnect all cables and telecommunication lines that are
connected to the system.
Retain all screws or other fasteners when removing
access cover(s). Upon completion of accessing inside the
product, refasten access cover with original screws or fas-
teners.
Do not access the inside of the power supply. There are no
serviceable parts in the power supply. Return to manufac-
turer for servicing.
Power down the server and disconnect all power cords
before adding or replacing any non hot-plug component.
When replacing a hot-plug power supply, unplug the power
cord to the power supply being replaced before removing the
power supply from the server.
CAUTION!
I
F
THE
SERVER
HAS
BEEN
RUNNING
,
ANY
INSTALLED
PROCES
-
SOR
(
S
)
AND
HEAT
SINK
(
S
)
MAY
BE
HOT
.
!
!
