STRATO LCD3207, Operating Instructions Manual, Page: 27 / 33

27
Adjustment of “Contrast” and “Brightness”
6.5.5 Geometric Page Menu (Only for VGA)
Press the Menu button, and then press ＜ or ＞
button until the “Geometric” menu appears.
Press ∧ or ∨ button to highlight the item.
Press ＜ or ＞ button to adjust.
Press the Menu button to return or exit.
Press the Menu button, and then press ＜ or ＞
button until the “Geometric” menu appears.
Press ∧ or ∨ button to highlight the item.
Press ＜ or ＞ button to select “Cool, Normal,
Warm or User”.
Press the Menu button to return or exit.
Using “Colour Temperature”
If you select the item of “User”, press the Enter button
to pop up a menu as illustration for you to adjust the
colour temperature to you desirable value.
Channel Selection
Press the CH+/- button to search the channels, the channel number will increase or decrease
by 1 for each pressing excluding the skipped channels.
Press the number buttons 0~9 to select the corresponding channel content. If the channel
number is bigger than 9, just press the two number buttons successively.
The time interval should not exceed 2 seconds.
If the channel number you pressed is bigger than the maximum channel number that the
setting is permitted, the maximum available channel number will be accessed.
Channel Preview
Press the Recall button to switch between present channel and previous channel.