3
MONITOR CONTROLS – FRONT PANEL
1)
Time
– Use this time control dial when in the sequence camera mode. It allows you to
adjust the dwell time (1-60 seconds), or the amount of time between the cameras
automatically switching between channels 1 and 2
2)
VCR Button –
This button will change the display from the camera inputs to the VCR
Audio/Video playback and recording signal. The Red LED light located over this button
will be ON when the VCR mode selection has been chosen. To return to the previous
screen, press VCR again
.
3)
Standby Button
- This button will turn the unit into Standby Mode (the Red LED light
will be ON). In Standby mode, the VCR Out terminal will still output signal. Pressing it
again will turn the power ON (the Red LED light will be OFF). The master power switch,
which controls the monitor is located at the back of the unit.
4)
SEQ
. – This button will place the unit into Sequential display mode. In sequential
display mode, the monitor will automatically rotate between the different cameras.
5)
C1/C2 Switch
C1 - Allows you to see Camera 1
C2 – Allows you to see Camera 2
6)
Volume
– Decrease or increase volume sound from camera
STANDBY
SEQ
VCR
C1/C2
TIME
VOLUME
1 2 3 4 5 6