7
OPERATION
CONNECTING MONITOR TO A VCR
Connections
Connect the supplied audio/video cable from the back of the monitor to the
Audio/Video Input of the VCR
.
Note: If you are connecting this unit to a standard VCR you must set your VCR to a
video channel, such as an A/V, Line 1/Line 2, AUX, etc or a snowy picture will result
during playback
Did You Know?
You have the option of connecting this system to a Time Lapse VCR. A time lapse
VCR provides you with multiple recording options, allowing you to record up to 40
days using a standard T-120 tape. Refer to the optional accessories page for more
details.
TROUBLE SHOOTING
If the system does not function properly, check the following points:
FOR MORE INFORMATION
www.strategicvista.com
Make sure the camera is not facing any
direct light or sunlight
Picture flickering or Over
Exposed
Check the cable for any lose connection
No Picture
CAMERA
Check the condition of the POWER
source
Shrinking picture
Adjust the VOLUME
Picture but no Sound
Clean the camera lens. Re-adjust the
CONTRAST or BRIGHTNESS controls
Poor picture quality
Check for AC connection
NO POWER
Re-adjust the CONTRAST or
BRIGHTNESS controls
Too dark or bright
MONITOR
REMEDY
PROBLEM
RCA Cables
(not included)
AUDIO VIDEO
As our products are subject to continuous improvement, SVII and its subsidiaries reserve the right to modify product
design, specifications and prices, without notice and without incurring any obligation. E&OE
AUX
OUT
VCR
OUT
VCR
IN