500 mm
(min)
50mm
Fenc
e H
eigh
t
300mm
Diameter
Depth
Note: Some components are optional and not required in all configurations
SHS Post
Post Cap
Post
Track
Lattice Clip
Lattice
Ball Cap
Post Cap
Screen-top
Lattice Track
Post Infill
10x16 Screws
Sheets
Rivets
Single Gate
Double Gate
Butt Hinge
Gate Latch
Striker Plate
Butt Hinge
Gate Latch
Striker Plate
Good Neighbour components are displayed in the figure below,
some components are optional and not required in all configurations.
The top and bottom tracks are fixed to the posts using 10x16mm
self drilling screws on both sides. Posts are fixed together using
10x16mm self drilling screws at a maximum spacing of 600mm
and no further than 100mm from the top or bottom of each post.
CGI Mini panels need a 38x25mm internal rail, fixed to the posts.
Fencing in wind speeds of W41 and higher in both cyclonic and
non-cyclonic areas, need the sheets to be fixed to the top and
bottom tracks at the overlaps with 10x16mm self drilling screws.
It is recommended that the sheets also be joined mid span at
Gates are available in single format for pedestrian access or double
format for vehicle access and can be optioned with or without the
Good Neighbour screen top. Single gates are 820mm wide and
are commonly fixed to 50mm SHS posts, with an 845mm opening.
Double gates are 3220mm wide and are commonly fixed to 65mm
SHS posts, with a 3255mm opening. Gates come pre-assembled
and are provided with hinges, latches and catches. Accessories
such as pad bolts and drop bolts are optional extras.
Posts are supplied 545mm longer than the height of the fence.
3 Sheet
2 Sheet
1590
1630
1470
2350
2390
2170
3 Sheet SHS
2400
2440
2220
Wavelok, Superdek
CGI, CGI Mini
Smartspan
Sheet Infill Style
2 Sheet SHS
1640
1680
1520
FENCE POST SPACINGS (mm)
Table 2.0
the overlap using a size four rivet. Refer to the ‘Good Neighbour
Installation Guide’ for installation instructions.
Figure 3.0
GATE POST OPENINGS
-
Single 840mm - Double 3255mm
GATES
COMPONENTS
