WINDOWS
MAINTENANCE
Your Stratco Homeshed will maintain its good looks for even longer with
a simple wash and wipe down with a soft broom. Stratco Homesheds are
produced from the highest quality materials and will provide many years of
service if the important recommendations set out in the Stratco ‘Selection,
Use and Maintenance’ brochure are followed.
CONTACT
1300 165 165
www.stratco.com.au
All brands and logos/images accompanied by ® or ™ are
trade marks of Stratco (Australia) Pty Limited.
© Copyright January 13
23/01/13
If installing a window, please note that the louvred window requires one
trimmed sheet and the sliding window requires two trimmed sheets.
During the process of fixing the wall sheets to the Homeshed frame
determine the location of the window. Fix the wall sheets prior to installing
the window according to the “Building the Frame” section of this installation
guide. The sheet/s in the location of the window will need to be trimmed
to accomodate the window, allowing for the base of the window to be
supported by and fixed into a wall girt.
Place the remaining sheets loosely into position and check the window
will fit the opening. Ensure the wall sheets either side of the window
tightly abutt the window frame so no gaps occur. Correct spacing of the
wall sheets is best achieved by ensuring the top edge of the wall sheets
are aligned parallel with the top edge of the top wall girt. Place the pre-
assembled window into the opening and check for squareness before
continuing to lay the remaining sheets.
Install the window frame to the crest of the wall sheets using colour
10x16mm self drilling screws supplied. Ensure the screws are evenly
spaced around the remaining frame (Figure 23). Place a bead of silicone in
each corner of the window to prevent water entry.
Figure 23
