Features
Caller ID Features
Strata CS Analog Telephone 12/00
17
Receive Calls
1. When the telephone is not in use and a new
call is received, the LCD displays NEW,
the phone number, the caller’s name, and
time and date of the call for the first 20
seconds. The
RPT
(repeat) symbol appears
if the call has come in more than once.
2. After 20 seconds with no activity, the
display defaults to the Standby screen and
remains on until another call is received or
a button is pressed. The Standby screen
displays the total number of calls stored
and how many new calls have not been
reviewed.
Review Calls
1. When you have new incoming calls, the
NEW
symbol flashes on the Standby
screen. Next to the
NEW
symbol is the total number of new calls. Press
5HYLHZ
8S
(
▲
) or
5HYLHZ'RZQ
(
▼
) to review the incoming stored calls.
2. The
NEW
symbol attached to each call is removed after you review the call.
3. If the
NEW
symbol is still flashing when the display goes back to the Standby
screen, there are new calls that you have not yet reviewed.
4. The reviewed number can be stored into any of the
$XWR0HPRU\
buttons or
dial pad memory locations by pressing
6WRUH
first, then one of the memory
buttons.
5. When you have reached the end of the call
records, [-END OF LIST-] displays
,
confirming there are no more calls stored.
Note
If the telephone number received is more
than 10 digits, the LCD only stores the first 10 digits in memory.
Summary of Contents for CS-C2210
Page 1: ...December 2000 Analog Telephone User Guide...
Page 8: ...Contents Chapter 4 Maintenance Troubleshooting iv Strata CS Analog Telephone 12 00...
Page 12: ...Introduction Related Documents Media viii Strata CS Analog Telephone 12 00...
Page 36: ...Maintenance Troubleshooting Telephone Repair 24 Strata CS Analog Telephone 12 00...
