19
of 28
V 03.17
STRAPEX STB 71/73/75
ENGLISH
►
After the display turns green and an acoustic
signal sounds the cooling time is ended. Lift
rocker lever.
– Rocker of the tensioning device opens.
After lifting the rocker lever, do not
re-tension (do not press the tensioning
button any more).
►
Swivel the tool to the right away from the
strapping.
WARNING
If the tool is removed too early the dis-
play turns orange with error code and
an acoustic signal sounds repeatedly
(Section 6.8).
►
Carry out a visual sealing inspection (Section 5.2)
5.2
Checking the seal
WARNING
Never transport or move packaged goods with improperly performed strapping /
weld sealing - serious injuries may result.
Perform sealing check after each strapping.
►
Perform sealing check by visual inspection.
1
Good seal
(the entire sealing area has been
cleanly welded, without excess material being
forced out sideways).
2
Poorly welded seal
(weld not over entire
sealing area), welding time too short.
3
Poorly welded seal
(excess material has
been forced out sideways), welding time too
long.
In the case of straps with poorly welded seals:
►
Check the welding time setting (Section 4.5).
►
Strapping with poorly welded seals must be performed again.
►
Check strap type (Section 7).
►
If good welding is not achieved, the tool must be checked by an authorized service center.
