15
of 28
V 03.17
STRAPEX STB 71/73/75
ENGLISH
4.4
Setting soft tension
When soft tension is set the tension wheel starts more slowly and the tension force is reduced. This
prevents excessive soiling when PP straps are used.
►
Press "Soft" button (1).
– The soft mode
is deactivated
when the
"SOFT" display (2) changes position and
is shown outlined.
►
Press "Soft" button (1).
– The soft mode
is activated
when the
"SOFT" display (3) changes position and
is shown in bold.
– The displayed tension force is reduced
correspondingly.
– On the left under the tension force an "S"
(4) also appears.
4.5
Setting welding time
The set welding time is displayed continuously by means of filled dots when the tool is ready for opera
-
tion.
►
Press the "Welding time" button (2).
– Unused displays disappear.
–
The filled dots of the currently set welding
time flash for 5 seconds.
– + and – appear.
►
Press the + (1) or – (3) button and hold down
until the desired welding time is displayed.
►
Save: Press the "Welding time" button (2) or
wait 5 seconds.
4.6
Switching touch-pad lock on and off
The touch pad can be locked to prevent unwanted
changing of the settings.
►
Locking
: Press the “Touch pad lock” button
(1) and hold down while pressing welding
button (Section 3.1, item 2) at the same time.
– The lock symbol (2) changes position and
is shown closed.
►
Unlocking
: Press the “Touch pad lock” button
(1) and hold down while pressing the welding
button (Section 3.1, item 2) at the same time.
– The lock symbol (3) changes position and
is shown open.
The favourite mode (Section 4.7) can be switched on even when the key lock is activated.
If the adjustment of the settings is not desired, the favourite level should be set in the
same way as the normal level.
1
2
3
4
1
2
3
2
1
3
