Wall
rack User Manual
Curve
(Courbes)
Press Down button four times to go to Curve menu. Press Right button to
enter.
Use Up/Down buttons to select all or channels (24 ways: 1- 24, 6 ways: 1-
6). Press the Right button to set the curve.
Use Up/Down buttons to select Square, Nondim, Lowcut or Linear. Use
the Right button to enter. Repeat as necessary to set other channels.
For Lowcut, use Up/Down buttons to select the lowcut level between 10 –
90 volt. Use the Right button to enter.
Repeat as necessary to set other channels. Press OK to confirm changes,
press OK again to save or press Esc to exit without saving any changes.
User Manual v2.
2 Jan.
200
7
17