Essential Information
1
6
1.2 Intended Use
This product has been developed and tested for use
under specifi c conditions. These are defi ned as the
conditions of Normal Use.
Use of this product outside of normal use may
create a hazardous situation for the resident,
operator or another party. To avoid this ensure the
product is only used in accordance to the following
parameters and all instructions in this document.
— Intended Resident: This bed is intended for a
resident over 12 years old and taller than 139cm.
— Intended Environment: This product should only
be used in a facility where medical supervision
and care is available. This includes nursing
homes and rehabilitation centres. This product
must not be used in an acute care, hospital or
domestic environment.
— Locked Castors: When operating the bed, with
or without a resident, the bed castors must
remain
locked.
— 230kg Safe Working Load (SWL): The load on
the bed can never exceed 230kg. This includes
accessories, mattress and style packs. The load
must be distributed evenly.
— 2 Minute Duty Cycle: Continuous operation
of bed is limited to 2 minutes. An 18 minute
cool down is required for every 2 minutes of
continuous use.
— Annual Servicing: This product requires regular
maintenance with a service check carried out by
a
qualifi ed service technician. Bed to be serviced
every 12 months to maintain good working order,
and uphold the standard product warranty.
— Mattress: This product may only be used with
mattresses of the size specifi ed in Section 2.4.
— User Training: Operators of this product must
be familiar with all conditions and parameters
presented by this document.
