Home
We now have successful communications with the base station so we can now pair with our device or we
can select the Spectrum Analyser mode or Data Provider Monitor mode.
Pairing Procedure
Remove power from the SW-SB module.
Click the Pair button on the toolkit.
You now have 10 seconds to re-apply power to the SW-SB module.
If you connect successfully the toolkit will change to the Information page.
If the pairing fails try again.
NOTE:
The act of Pairing with the toolkit will
not
change the radio configuration settings of the
connected
device. The settings will only change if you change them yourself within the toolkit.
7
Straightpoint
SW-SB U
SER
M
ANUAL
Summary of Contents for SW-SB
Page 1: ...SW SB User Manual...
Page 17: ......
