Configuration
This section explains how to install software and connect the required devices together. Please note that
you will need the T24 Toolkit software and a SW-USBBSE base station to allow your computer to
communicate with SP telemetry devices.
Installation
T24 Toolkit
To configure the devices we must use the
T24 Toolkit
software application. This can be downloaded from our
web site or may be shipped with your products.
Install this on a PC or laptop.
Run
setup.exe
and follow the prompts to install the software.
Base Station
If you have a USB version of the base station (SW-USBBSE) then you just need to plug this into a USB socket on
your PC. If you are using an alternative base station then please refer to the appropriate manual.
5
Straightpoint
SW-SB U
SER
M
ANUAL
Summary of Contents for SW-SB
Page 1: ...SW SB User Manual...
Page 17: ......
