It is recommend that you run a wash cycle with the
dishwasher empty and then remove the plug from the
socket, turn off the water supply and leave the door of
the appliance slightly open. This will help the door
seals to last longer and prevent odours from formin g
within the appliance.
If the applia nce must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
One of the factors that cause odours to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
Before cleaning or performing maintenance, always
remove the plug from the socket.
To clean the exterior and rubber parts of the dishwasher,
do not use solvents or abrasive cleaning products.
Only use a cloth with warm soapy water.
To remove spots or stains from the surface of the
interior, use a cloth dampened with water an a little
vinegar, or a cle aning product made specifically for
dishwashers.
Re move the Plu g
No Solve nts or Abrasi ve Cle aning
M oving t he App liance
Seal s
After eve ry wash, turn off the water supply to the
appliance and le ave the door slightly open so that
moisture and odours are not trapped inside.
Af ter Eve ry Wash
When no t in U se for a LongTim e
18
The installation of the pipes
and electrical equipments
should be done by professionals.
Electrical Shock Haza rd
Disconnect electrica l power before
installing dishwasher.
Failure to do so can result in death or
elect rical shock.
The installation position of dishwasher should be near the exist ing inlet and drain hoses and
power co rd.
One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of
the dishwasher.
Installation preparation
Note: ple ase check the accompanying in stallation accessories(hook for aesthetic panel,screw)
●
