Troubleshooting
The hob produces a smell the first few times it is
used
• Heat a pan full of water on each zone for half an hour.
Pans make a noise during cooking!!
• This is caused by vibration due to the passage of
energy from the hob to the pan.
On a high setting this is quite normal for certain types of
saucepan. It will not damage the hob.
The hob makes a slight clicking sound
• This is caused by the distribution of power between
two heating zones on the same side of the hob.
The top of the hob is always warm (even when
not in use)
• The electronic part of the hob, like a ny other electro n i c
equipment (T V, transformer, etc), becomes warm.
The fan keeps working for a few minutes after
the hob has been turned off
• To cool down the electronics.
Once a cooking zone has been turned on, the
indicators on the panel keep flashing !!
• The pan you are using is not suitable for induction
cooking or is less than 12cm (5”) in diameter.
The hob won’t work. The indicators don't come
on
• The electricity supply is not re a c h i n g the appliance
(faulty supply or connection);
Check the fuses and the cut-out switch.
• The electronic circ u it is not working properly;
Call Stoves Customer Support, or your supplier.
When it is turned on, the appliance cuts out
• The hob connection is faulty.
Check the connection and check that the connection
complies with the appropriate standards.
When it is turned on, only one side of the hob
works
• The hob connection is faulty.
Check the connection and check that the connection
complies with the appropriate standards.
19
08 26296 00 - C TCi 22/10/07 10:07 am Page 19
Summary of Contents for S7-C600TCi
Page 1: ...S7 C600TCi S7 C900TCi Handbook ...
Page 26: ......
