7
6
No shelf or overhang of combustible
material should be closer than 650 mm
above the hob.
4
If your appliance has a side opening door,
we recommend a side clearance of 60
mm to allow the oven door to fully open,
if placed up to a wall or cabinetry.
4
The cooker must have a side clearance
above hob level of 90mm up to a height
of 400 mm.
4
This cooker may be fitted flush to the
base units of your kitchen.
S TA B I L I T Y B R AC K E T
If the cooker is fitted with a flexible connection, a
stability bracket should be fitted to engage in the back
of the cooker. A stability bracket can be bought from
your local supplier.
A stability bracket can be fitted as follows:
1. Place the cooker in the position and draw a PENCIL
LINE level with the front edge.
2. Mark the centre of the cooker to give the CENTRE
LINE for the bracket.
3. Remove the cooker and mark off 450 mm from the
PENCIL LINE to locate the front edge of the lower
bracket.
4. Fix the bracket to the floor. Measure from floor
level to engagement edge in the back of cooker and
add 3 mm.
5. Assemble the underside of the top part of the
bracket to this height.
Rear wall
(3)
450 mm
1
2
5
4
3
4
Underside of top bracket slots into
engagement edge in back of cooker.
4
Review stability bracket location
identified on rear of appliance and
position bracket accordingly.
Summary of Contents for Gas 60 cm
Page 1: ...INSTALLATION INSTRUCTIONS Gas 60 cm models ...
Page 11: ...11 ...
